General information.

An unbeatable team - Turbelle®pumps with electronic motor + Turbelle® controller - they can reproduce real reef currents in your tank. TUNZE® controller concentrate on the fundamentals and the most important things. The following flow patterns can be produced in the aquarium very easily:

Wave simulation ("Pulse only") 7091 / 7095 / 7096
By setting the maximum and minimum outputs as well as the pulse duration, high and low water velocities can be produced generating a natural wash of waves under a one-metre water column.

Simulation of tidal currents (“Interval”) 7095 / 7096
The pump channels are switched on or off alternately. The water flows through the reef from both sides at an adjustable switching time from 1 minute up to 12 hours.

Sequential pump circuit ("Sequential") 7095 / 7096
The Turbelle® pumps are started sequentially, which permits the generation of a swelling current.

Random flow ("Sequential") 7095 / 7096
Random flow is generated by wave simulation and sequential pump operation. For quite a number of special reef zones (surf) this combination may produce an interesting water movement.

Oscillating currents with Nano Wavebox / Wavebox or Turbelle® pumps (Wavecontroller) 7096
In Multicontroller 7096, the pump channels can be used as a Wavecontroller for the direct or alternating operation of Nano Wavebox / Wavebox or the Turbelle® pumps can be used. This function includes an automatic search of the resonance frequency, which can be combined with wash of waves or high and low tide simulation.

Feeding operation (Foodtimer) 7091 / 7095 / 7096
In all Turbelle® controllers, the pumps can be stopped completely by the push of a button to enable feeding. After about one to fifteen minutes (adjustable), a restart is carried out automatically.

Moon-phase simulation ("Moonlight") 7095 / 7096
Multicontroller 7095 and 7096 contain a moon-phase simulation function with LED light and adjustable 29-day moon phase.

Operation in night mode ("Night mode") 7091 / 7095 / 7096
In all Turbelle® controllers, a photo-electric cell is used to reduce the performance of the Turbelle® pumps at night. As in a reef, small animals and plankton can rise in the aquarium completing the natural cycle of diurnal and nocturnal animals occupying the habitat..

Storm for desedimentation ("Storm cycle") 7096
Like in nature, sediment should be removed from a reef aquarium in regular intervals. This function can be programmed in Multicontroller 7096 to be carried out automatically; the pumps connected are controlled on the basis of an efficient and precise rhythm.

Multicontroller
(7095.000)

TUNZE® Multicontroller 7095 is a digital control unit for all Turbelle® pumps with Driver 7240.26 / 7240.27 or electronic motor. The unit simulates the different marine flow conditions in the aquarium. By means of the Pump Adapter 7094.40, Turbelle® classic 2002 and 4002 can also be controlled. Multicontroller 7095 contains an LED moonlight with a 29-day moon phase and can control up to eight Turbelle®. The clearly arranged operating panel with a waterproof membrane keypad and adjusting knobs ensures a precise and practical operation. The output of the controlled pumps is shown by an LED display indicating from 30 to 100 per cent. All pump connections are located on the lower side of the unit.
In case of a power failure, the various settings remain saved; after the power interruption, the Multicontroller continues to operate with the program.
Delivery with four connecting cables 7092.30 and a photo-electric cell. Up to four Turbelle® pumps and up to eight using the Y adapter 7092.34 produce a near-nature flow control.

1: Deutsch, English, Francais (x7095.8888) 2: Italiano, Espanol, РУССКИЙ (x7095.8882)

7095.000	289.19 USD
Including German VAT: (19.00 %)

Singlecontroller
(7091.000)

For the wave simulation of a Turbelle® electronic or stream 6105/6205/6305 including connecting cable. Y adapter 7092.34 can be used to synchronously operate two Turbelle® electronic. If the photo-electric cell 7094.05 (not included in the scope of delivery) is attached to the connecting port, the night-mode operation is activated automatically.
Foodtimer: By the push of a button, the pumps can be stopped to enable feeding. After about eight to ten minutes, a restart is carried out automatically.

1: Deutsch, English, Francais (x7091.8888) 2: Italiano, Espanol, РУССКИЙ (x7091.8882)

7091.000	70.75 USD
Including German VAT: (19.00 %)

Turbelle® stream Kit TS24
(TS24)

= 2 pumps Turbelle® stream 6105
with 2x13,000 l/h, (2x3,170 USgal.)
+ Multicontroller 7095
For aquariums of 500 - 3,000 l (132 - 792.5 USgal.), wave simulation, foodtimer, operation in night mode sequential pump circuit and tide simulation.

1: Deutsch, English, Francais (x7095.8888) 2: Italiano, Espanol, РУССКИЙ (x7095.8882) 3: Deutsch, English, Francais (x6065.8888) 4: Italiano, Espanol, РУССКИЙ (x6065.8882)

TS24	981.19 USD
Including German VAT: (19.00 %)

Turbelle® stream Kit TS48
(TS48)

= 4 pumps Turbelle® stream 6105
with 4x 13,000 l/h, (4x3,170 USgal.)
+ Multicontroller 7095
For aquariums of 1,000 - 6,000 l (264.1 - 1,585 USgal.), wave simulation, foodtimer, operation in night mode sequential pump circuit and tide simulation.

1: Deutsch, English, Francais (x7095.8888) 2: Italiano, Espanol, РУССКИЙ (x7095.8882) 3: Deutsch, English, Francais (x6065.8888) 4: Italiano, Espanol, РУССКИЙ (x6065.8882)

TS48	1,673.20 USD
Including German VAT: (19.00 %)

Multicontroller
(7096.000)

TUNZE® Multicontroller 7096 is a control device for all Turbelle® pumps fitted with an electronic motor, which can be adjusted and programmed by computer when attached by USB cable. The controller has been fitted with an 8-bit high-performance micro-processor and a memory module, which keeps the settings stored even in case of a power failure:
For adjustment by computer, the Multicontroller does not need a connection to the pumps in the tank.
After adjustment by and saving on the computer, the updated data remain saved in the Multicontroller as well.
TUNZE® Multicontroller 7096 comprises the functions of Multicontroller 7095 and Wavecontroller 6091 as well as some additional new control possibilities. It simulates various marine flow conditions in the aquarium and has been fitted with an especially bright LED moonlight.
Scope of delivery: Multicontroller with photo-electric cell, moonlight, holding device and 5 m (196.8 in.) USB cable, four connection cables, CD with Windows compatible control program.
Suitable for MS-Windows 98, 2000, XP, Win7 and Vista.

 Instructions for use

 Instructions for use

7096.000	175.55 USD
Including German VAT: (19.00 %)

Example: Screen display of Multicontroller 7096 for Wavebox 6215 and two Turbelle® stream 6105.

Accessories (order separately)

Y adapter
(7092.340)

Extends two output connections to 2 x 2 input connections; including four connection cables 7092.30.

7092.340	57.30 USD
Including German VAT: (19.00 %)

Photo-electric cell
(7094.050)

Permits operation in night mode with Singlecontroller 7091. Standard feature in Multicontroller 7095 and 7096.

7094.050	18.04 USD
Including German VAT: (19.00 %)