> Products  >   >   >   > Aquarium cabinet kits  > TUNZE Outlets

  Print       

Country::

Finland

TUNZE Outlets

TUNZE® outlets with surface suction are an ideal solution for gravity water supply below the aquariums. An equal ratio of surface water and water from the lower water column are removed. The outlets remove only as much water as is pumped into the aquarium. On account of the light-protected construction, they are almost maintenance-free.
TUNZE® outlets are supplied ready for mounting, with detailed mounting instructions. Inlet and outlet pipes are not included.
Two outlet systems should be used in aquariums with more than 600 litres capacity (160 USgal.).
At the outlet side, commercially available outlet pipes can be connected to the pipe sockets. However, we recommend the use of the outlet hose system 1075/2 to keep the noise as low as possible.
For the inlet, we recommend our inlet hose set 1073. The connecting hose for the pump in the cabinet is included.



Overflow Box

Overflow Box
(1074/2)

Overflow for supplementary installation with surface and bottom suction up to about 1,200 l/h (320 US gal./h). No boreholes in the glass required, and thus it can be retro-fitted easily. Even after an interruption of the recirculation pump, it will restart the siphon automatically. With additional U pipe 1001.74 (cf. Turbelle® filter accessories), a throughput of 1,500 l/h (400 US gal./h) is possible. Water outlet diam. 40 mm (1.57 in.).
For easy installation and quiet operation, we recommend the use of overflow hose set 1075/2.

Instructions for use

 Additional illustration:

spacer spacer spacerspacer
1074/2 129,20 EUR
Including VAT: (24,00 %)


Wall Overflow

Wall Overflow
(1076/2)

Built-in overflow for lateral glass boreholes, diam. 43 to 45 mm (1.69 to 1.77 in.), on the rear or lateral wall of the aquarium, with surface and bottom suction up to about 1,500 l/h (400 US gal./h). Water outlet diam. 40mm (1.57 in.).
For easy installation and quiet operation, we recommend the use of overflow hose set 1075/2.

Instructions for use

 Additional illustration:

spacer spacer spacerspacer
1076/2 109,20 EUR
Including VAT: (24,00 %)


Central Overflow

Central Overflow
(1077.000)

Central overflow with surface and bottom suction up to about 1,500 l/h (400 US gal./h). Is used for aquariums with a central internal drain pipe. Fitted with a socket for PVC pipes, diam. 40 mm (1.57 in.).
For complete installation, we recommend the use of screw connection, pipe and hose 1077.100.

Instructions for use

 Drawing.

spacer spacer spacerspacer
1077.000 109,20 EUR
Including VAT: (24,00 %)


Screw connection, pipe and hose

Screw connection, pipe and hose
(1077.100)

For outlet 1077, consisting of screw connection 40/50 mm (1.57/1.96 in.), 1 3/4 in. glass borehole in the bottom, abt. 55 mm (2.1 in.) in diameter, and upright stand pipe 1 m (39.3 in.) by 40 mm (1.57 in.) in diameter. A stainless steel clamp with outlet hose 1 m (39.3 in.) by 40 mm (1.57 in.) in diameter is supplied. Delivery without mounting instructions; to be mounted by experienced expert only.

spacer spacer spacerspacer
1077.100 58,40 EUR
Including VAT: (24,00 %)


Outlet hose

Outlet hose
(1075/2)

Consisting of 2m (78.7 in.) special outlet hose, diam. 40mm (1.57 in.), with clamps and holder.

spacer spacer spacerspacer
1075/2 43,70 EUR
Including VAT: (24,00 %)


Inlet hose and fittings

Inlet hose and fittings
(1073.000)

Consisting of four pipes, diam. 25 mm (.98 in.) x 1 m (39.3 in.) and three sleeves, diam. 25 mm (.98 in.), seven 90° angles, connecting hose and clamps.

Instructions for use
spacer spacer spacerspacer
1073.000 81,10 EUR
Including VAT: (24,00 %)


Outlet filter

Outlet filter
(1075.500)

Mechanical precleaner filter for all cabinet filter tanks, placed directly next to the drain hose of TUNZE® outlet, with removable post-filter with 300 µm (11.8 mil) nylon mesh.

spacer spacer spacerspacer
1075.500 65,20 EUR
Including VAT: (24,00 %)


Post-filter bag

Post-filter bag
(9410.200)

300µm (11.8 mil) nylon mesh, suitable for post-filters.

spacer spacer spacerspacer
9410.200 14,00 EUR
Including VAT: (24,00 %)
Turbelle庐 Filter Accessories

Turbelle庐 Filter Accessories

For pipe extension in aquariums over 50 cm (19.6 in.) in height, to be ordered separately:



Strainer, 12cm (4.7 in.)

Strainer, 12cm (4.7 in.)
(1001.790)

Suitable for pipe 1001.760, bushing 3000.780 and T piece 1001.800, to be used up to 4,000 l/h (1,050 US gal./h).

spacer spacer spacerspacer
1001.790 8,90 EUR
Including VAT: (24,00 %)


T-piece

T-piece
(1001.800)

With cap for tube 1001.760.

spacer spacer spacerspacer
1001.800 5,50 EUR
Including VAT: (24,00 %)


Pipe for Turbelle庐

Pipe for Turbelle庐
(1001.760)

To connect TUNZE filters with Turbelle® pumps, inside diameter 25mm (.98 in.), outside diameter 27mm (1.06 in.), length 30cm (11.81 in.).

spacer spacer spacerspacer
1001.760 5,10 EUR
Including VAT: (24,00 %)


Bushing, diam. 21/25mm (.82/.98聽in.)

Bushing, diam. 21/25mm (.82/.98聽in.)
(1001.780)

Joins two pipes 1001.760.

spacer spacer spacerspacer
1001.780 2,00 EUR
Including VAT: (24,00 %)


Silicone hose, diam. 22 x 28 mm x 2 m (.86 x 1.1 x 78.7 in.)

Silicone hose, diam. 22 x 28 mm x 2 m (.86 x 1.1 x 78.7 in.)
(1073.200)

is used as feed hose for an easy connection of the recirculation pump to the aquarium. To be used for all cabinet filter systems, 100 % resistant to saltwater.

spacer spacer spacerspacer
1073.200 37,10 EUR
Including VAT: (24,00 %)

The prices listed in the catalogue are given in EUR and contain a value-added tax of 24%. Additional information:

© TUNZE Aquarientechnik GmbH