|
|
Next catalogue page.>> 0505.110 - 2002.710
 |
O-ring seal
|
 |
Impeller
|
 |
Air draw nozzle
with hose for Turbelle ® 600/2, 800/2
|
 |
Impeller housing
|
 |
Filter cartridges, 135mm (5.3 in.)
Five spare filter cartridges with wound acrylic wadding fibres with a filter area of 135 x 1,500mm (2.9 x 5Â in.)
Suitable for Turbelle® e-jet, Pot-Type Filter 820, Cartridge Filter 800 and all Comline filters.
|
 |
Carbon floss cartridge, 135mm (5.3 in.), 1 pc.
Activated carbon combined with acrylic wadding.
|
 |
Nano pump
Pump 0800.040 will not be produced any more in future. Instead the successor model 1073.008 will be delivered. If, however, you need pump 0800.040 as a replacement pump for units 9002 and 3165 up to the year of construction 02/2009, we kindly ask you to indicate the fact explicitly. In order to be able to replace pump 0800.04 in the Automatic Calcium Dispenser 3170, you need connecting unit 3170.135 in addition.
150 to 800 l/h (39.6 to 211 USÂ gal./h), 10 W, Hmax: 1.60 m (62.9 in.), 230 V / 50 Hz (115 V / 60 Hz), cable 1.50m (59 in.); housing without outlet and suction cup: 61 x 58 x 45 mm (2.4 x 2.28 x 1.77 in.). Outlet pipe: L 20 mm (.78 in.) , diam. 13 / 10.5 mm (.51 / .41 in.).
|
 |
Drive unit for 800.04 (50 Hz)
|
 |
Cover on impeller housing
|
 |
Outlet pipe, diam. 13 mm (.51in.)
|
 |
Pump cover
|
 |
Strainer
|
 |
Screw cap for PAF
|
 |
Bracket
|
 |
Foam cartridge
Filter cartridge made of aquarium sponge to be used separately or with Cartridge Filter Mat 800.22.
|
 |
Cartridge filter mat
Two cartridge fleeces for Foam Cartridge 800.14.
|
 |
Motor block
for 805
|
 |
Drive unit
|
 |
TS mounting bar - 97Â cm (38.1 in.)
|
 |
Cover f. F320/820
|
 |
Strainer
|
 |
Pot for 820
|
 |
Return stop
|
 |
TS bell compl.
|
 |
Cover for TS bell
|
 |
TS bell
|
 |
TS lid black
|
 |
Screw M 6x25
|
 |
TS cover
|
 |
TS screw connector
|
 |
Cap
|
 |
Grid with cap
|
 |
Adapter
|
 |
Holder for TS mounting bar
made of glass-fiber reinforced polycarbonate
|
 |
Disc
|
 |
TS heater&electrode holding device
for TS mounting bar made of glass-fiber reinforced polycarbonate
|
 |
Quick-change filter extension
by one chamber
Dimensions: l.108 x w.135 x h.191 mm
|
 |
TS-Expansion box
|
 |
Bio cartidge
|
 |
Cover for 870/1670
|
 |
Cover with clip
|
 |
Micro wadding, 10 x 60g (2.1Â oz.)
|
 |
Micro Wadding, 60 g (2.1 oz.)
Micro wadding for very fine filtration in freshwater and marine aquariums; removes turbidity and bonds particulate matter, such as plant remains, fish excrement and food remains by absorption.
Suitable for Comline® filters, Turbelle® refillable cartridges or conventional filters.
|
 |
Micro wadding, 5kg (176Â oz.) sack
|
 |
Macro wadding, 10 x 250g (8.8 oz.)
|
 |
Macro Wadding, 250g (8.8Â oz.)
Macro wadding for very fine filtration in freshwater and marine aquariums; removes turbidity and bonds particulate matter, such as plant remains, fish excrement and food remains by absorption.
Suitable for Comline® filters, Turbelle® refillable cartridges or conventional filters.
|
 |
Bio reactor 876
Dimensions: l.108 x w.135 x h.191 mm
Built-in depth: abt. 80 mm
suitable for 200 l aquariums
|
 |
Branch connec.f.hose
|
 |
Bio connection for 805
and Turbelle® 1205.
|
 |
Bio tube
|
 |
Distribution nozzle
|
 |
Comline® Pump
Pump output: 250 – 850l/h (65 to 225 US gal./h), energy consumption: 2.5 – 4.5W, pumping head: 0.7m, voltage / frequency: 230V/50Hz (115V/60Hz), length of cable: 2m (0.08 in.), dimensions without outlet: 60 x 60 x 40mm (2.4 x 2.4 x 1.6 in.), outlet: ø13mm (.51 in.)
|
 |
Motor block
|
 |
Motor housing cover
|
 |
Impeller cover
|
 |
Drive unit
|
 |
Strainer
|
 |
Motor block
|
 |
2 Screw M 3x30 V2A
|
 |
Clamping ring
|
 |
Impeller bushing
|
 |
Cable clamp
|
 |
Repair kit
|
 |
Overflow tube
Inside diameter 25 mm (.98 in.), outside diameter 27 mm (1.06 in.)
|
 |
Glueing nipple D=7/11
|
 |
Pipe for Turbelle®
To connect TUNZE filters with Turbelle® pumps, inside diameter 25 mm (.98 in.), outside diameter 27 mm (1.06 in.), length 30 cm (11.81 in.).
|
 |
Flow deflector
For Turbelle® 805,1205.
|
 |
Bushing, diam. 21/25Â mm (.82/.98Â in.)
Joins two pipes 1001.760.
|
 |
Strainer, 12 cm (4.7 in.)
Suitable for pipe 1001.760, bushing 3000.780 and T piece 1001.800, to be used up to 4,000 l/h (1,050 USÂ gal./h).
|
 |
T-piece
With cap for tube 1001.760.
|
 |
Impeller
|
 |
Reducer
for 1000/2
|
 |
Air draw nozzle
with hose for Turbelle ® 1000/2, 1600/2
|
 |
Motor block
for 1005
|
 |
Rotor,shaft+bearing
|
 |
Drive unit
|
 |
Recirculation Pump Silence
Pumping power: 150 to 800 l/h (40 to 210Â USÂ gal./h).
Energy consumption: 3 to 8 W.
Pumping head: 1.25 m (49.2 in.), ½" GAS hose supports
Voltage / frequency: 230 V / 50Hz (115 V / 60Hz).
Cable length: 2 m (78.7 in.).
Dimensions without outlet and suction cups: 87 x 67 x 48 mm (3.4 x 2.63 x 1.88 in.).
|
 |
Cover with O ring seal
|
 |
Suction housing
|
 |
Housing locking bar
|
 |
4 suction cups + 2 hose supports
|
 |
Drive unit with bushing
|
 |
Screw cap 3/4 in., 10 bar (145 psi)
|
 |
Drive unit for 1073.03/.04 old
|
 |
Impeller housing for 1073.03/.04 old
|
 |
Screwed socket with O ring seal
|
 |
Drive unit with bushing
|
 |
Cover with O ring seal
for recirculation pump Silence 1073.008
|
 |
Suction housing
|
 |
Housing locking bar
for recirculation pump Silence 1073.008
|
 |
4 suction cups + 2 hose supports
|
 |
Drive unit with shaft
|
 |
3 O-rings seal Master 1073.09
|
 |
Drive unit, impeller f. 1073.09
|
 |
Impeller housing 1073.09
|
 |
Ceramic shaft with holder
|
 |
Hose adapter DN38, 1"1/2G
|
 |
Strainer
|
 |
3 O ring seals with stainless steel screws
|
 |
Drive unit
|
 |
Impeller housing
|
 |
Suction housing
|
 |
1 hose connections D38, 1"1/2 G
|
 |
4 silicone cups
|
 |
Hose,diam.25 x200mm
|
 |
Clamp
|
 |
Cover
|
 |
Insulating foam
|
 |
Outlet hose a. clamp 1m/D.40mm
|
 |
Protective grid
|
 |
Cover
|
 |
Bushing, outside diam. 25 mm (.98 in.)
To connect hoses or pipes to Turbelle® 805, 1205.
|
 |
Impeller housing
|
 |
Motor block
for 1205
|
 |
Drive unit
|
 |
Union for hose, diam. 9x12Â mm (.35 x .47Â in.)
|
 |
2 screw+2 nuts M6x16mm
|
 |
Bushing - outside diam. 25 mm (.98 in.)
For Turbelle® 3005,1605,5005,
hose connection diam. 25Â mm (.98Â in.).
|
 |
Impeller
for 1500/1501/1600/2
|
 |
Impeller housing
|
 |
Strainer
|
 |
Bubble counter
|
 |
Insulation mat
|
 |
Filter cartridges, 225mm (8.8 in.).
Five spare filter cartridges with wound acrylic wadding fibres with a filter area of 225 x 1,500mm (8.8 x 59Â in.).
Suitable for Turbelle® Cartridge Filter 1600 and 3200.
|
 |
Motor block
|
 |
Carbon floss cartridge, 225mm (8.8 in.), 1 pc.
Activated carbon combined with acrylic wadding.
|
 |
Strainer
|
 |
Motor block
for 1605
|
 |
Drive unit
|
 |
Strainer, 17 cm (6.6 in.)
Suitable for pipe 1001.760, bushing 3000.780 and T piece 1001.800, to be used up to 6,000 l/h (1600Â USÂ gal./h).
|
 |
Bio reactor 1676 (double)
Dimensions: l.216 x w.135 x h.191 mm
Built-in depth: abt. 80 mm
suitable for 400 l aquariums
|
 |
Bio filter ring 10p.
|
 |
PVC hose - diam. 6 x 9Â mm x 2Â m (diam. .23 x .34 x 78.7Â in.)
Black, suitable for all TUNZE bio reactors.
|
 |
PVC hose - diam. 6 x 9Â mm x 10Â m (diam. .23 x .34 x 393.6Â in.)
Black, suitable for all TUNZE bio reactors.
|
 |
PVC hose - diam. 6 x 9Â mm x 1Â m (diam. 23 x .34 x 39.1 in.)
Black, suitable for all TUNZE bio reactors.
|
 |
Hose clip
|
 |
Connection for bio
|
 |
Glass tank with cover Kit 16/21
|
 |
Glass tank with cover Kit 18/18.7
|
 |
Cover
|
 |
Motor housing
|
 |
Motor with cable
|
 |
Rotor
|
 |
Bio connection for 2002, 4002
|
Next catalogue page.>>
The prices listed in the catalogue are given in EUR and contain a value-added tax of 19%. Additional information:
|
|
|
Print
1: Deutsch, English, Francais (x3162.8888)
