|
|
Next catalogue page.>> 3000.015 - 3179.100
 |
Motor block
|
 |
O-ring seal, 78x2.5mm
|
 |
Cooling duct
|
 |
Upper bushing
|
 |
Magnetic rotor
|
 |
Drive shaft
|
 |
Brake shoes 2 pcs.
|
 |
Brake shell + ring
|
 |
Brake ring
|
 |
Bushing
|
 |
Clampring
|
 |
Impeller
|
 |
Impeller housing
|
 |
Mounting bar
|
 |
Elastic ground, 1 pair
|
 |
Sliding unit
|
 |
Clamp holder
|
 |
Screw set
|
 |
Holding device extension
for existing device, enables other fastening variants for the following applications:
Attachment to very thick panes (A)
Two long screws permit the attachment of the holding devices supplied, also on thicker panes up to 39 mm (1.5 in.).
Attachment to frames (B)
The extension can be used to attach the holding device to aquarium rims up to 39mm (1.5 in.) thickness. The rim can project outward by about 10 mm (.4 in.).
Supporting attachment for horizontal panes (C)
It allows attachment on horizontal aquarium panes for 4 to 8 cm (1.6 to 3.1 in.) with an adjustable support. Especially suitable for COMLINE units.
|
 |
Cable fastener
Length: 203 mm (7.9 in.), width: 2.5 mm (.09 in.).
100 units, black, UV stabilised.
|
 |
Turbelle庐 holder
Also for electrodes, heaters, et cetera.
|
 |
Holding device extension
For existing holding devices, enables other fastening variants, such as holder extension (extension of the perforated rail by 20 cm (7.87 in.)), glass top attachment with a width of 4 to 15 cm (1.57 to 5.9 in.), adhesive attachment and double attachment.
|
 |
Plate without thread
|
 |
2 screws M5x10mm
|
 |
Adhesive attachment for holder
|
 |
Holding bracket
For universal holding device permits TUNZE庐 holding rail to be fitted to vertical glass panes without the use of the usual clamp holders.
|
 |
Set 3000.07+3000.08
|
 |
Set 3000.09+3000.10
|
 |
Internal parts Turbelle庐
|
 |
Drive unit
|
 |
Upper bushing
|
 |
O-ring seal, 13x2.5mm
|
 |
Bushing
|
 |
Magnetic rotor
|
 |
Drive shaft
|
 |
Bushing shell
|
 |
2 Brake shoes
|
 |
Bushing, diam. 25/28 mm (.98 / 1.1 in.)
Joins Turbelle庐 with filter.
|
 |
Air draw nozzle
with hose for Turbelle 庐 3000 /2, 7200/2 - 7400/2
|
 |
Motor block
for 3005
|
 |
Motor block cover
for 805, 1005, 1205, 1605, 3005, 5005
|
 |
Drive unit
for 3005
|
 |
Bushing and attenuation disk
for 6105, 6205, 6305, 6215.200
|
 |
Bracket
|
 |
Suction cup holder
For Turbelle with three suction cups.
|
 |
Suction bell 4 pcs.
|
 |
Silencer holder for old Turbelle庐
|
 |
Silencer holding device
Supplement to the Turbelle庐 holding device supplied; suitable to reduce the pumping noises.
|
 |
Set 3060.40+3060.41
|
 |
Replacement pump
|
 |
Cover for 3110(/2)
|
 |
Skimmer cup 300 ml (10.1 f oz.)
for 3110/2 or 9002
|
 |
Skimmer cup lid
|
 |
Cover with slots
|
 |
Elbow for air hose 3110/9002
|
 |
Cover f. pump
|
 |
Silencer with hose
|
 |
Cover with four slots
|
 |
Impeller housing w. nozzle f. Comline
|
 |
Nozzle
|
 |
Comline skimmer support
|
 |
Pressure pipe
|
 |
M6 air regulating screw
|
 |
2 hoses+ cap
|
 |
Support for sensor
|
 |
Sensor w.cinch plug
|
 |
Holder board
|
 |
Holder board
|
 |
Sensor for 3152
|
 |
Sensor housing for 3152
|
 |
Sliding unit for sensor
|
 |
Sliding unit for level sensor
|
 |
Support for Osmolator
|
 |
Magnet holder for two sensors
|
 |
Support f. optical sensor
|
 |
Housing
|
 |
Filter panel
|
 |
Intake lid
|
 |
Rear cover
|
 |
Intermediate plate
|
 |
Rear Plate
|
 |
Bottom plate
|
 |
Filter fleece
for pre-filtering for Comline庐 Filter 3162 and Comline庐 Streamfilter 3163.
|
 |
Woven carbon filter medium
|
 |
Spacer for Magnet
to create an additional distance of 15mm between the Comline庐 housings
3162 / 3163 / 9004 / 6208 and the glass, particularly suited for aquariums with covers.
|
 |
Tube 19x108聽mm
|
 |
Streamfilter panel
|
 |
Streamfilter pump
|
 |
Flow deflector
|
 |
Nano Cleaner
Dimensions: L 125 x W 55 x H 220 mm (L 4.9 x W 2.1 x H 8.6 in.); maximum immersion depth approx. 210 mm (8.2 in.); patented magnet holder to be fitted up to a glass thickness of 19 mm (.74 in.); variable pumping power from 150 to 800 l/h (39 to 211 US聽gal./h); 230V / 50 Hz (115 V / 60聽Hz); 3聽-聽8 W. For aquariums from 40 to 200聽litres (10.5 to 52.8 USgal.) of salt water / fresh water.
|
 |
Bottom lid for 3165, 9002
|
 |
Nano Cleaner housing
|
 |
Outlet pipe with flow deflector
|
 |
Sliding cover
|
 |
Cap H7A, 酶 19mm
|
 |
Cap black 酶 9,5mm
|
 |
Retaining plate
|
 |
Filter housing
|
 |
Comline bell compl.
|
 |
Sliding unit Comline holder right
|
 |
Sliding unit Comline holder left
|
 |
Comline support
Universal holder for a Comline element up to a glass thickness of up to 39 mm (1.37 in.).
|
 |
Pot with handle
|
 |
Tube 19x300 mm
|
 |
Filter housing
|
 |
Comline bell complete for 3167
|
 |
Pot with handle
|
 |
Housing of Calcium Automat
|
 |
Connecting unit to 800.040
with O ring seal
|
 |
Connecting unit to 1073.008
with O ring seal
|
 |
Reactor of Calcium Automat
|
 |
Reducing adapter and T piece
|
 |
Y branch
|
 |
Screw cap and seal
|
 |
Bio connection for 3005
and Turbelle庐 1005, 1605, 5005.
|
 |
Sliding cover with cutout
|
 |
Filter mat
|
 |
Housing
|
Next catalogue page.>>
The prices listed in the catalogue are given in EUR and contain a value-added tax of 19%. Additional information:
|
|
|
Print
1: Deutsch, English, Francais (x3000.2448)
