The unit extends the holding power of Magnet Holder 6015.500 and 6025.512 for use on glass thicknesses of up to 15 mm (.59 in.).
In case of Magnet Holder 6025.515 and 3155.600 (as from year of construction 2012), the holding power is extended up to a glass thickness of 20 mm (.78 in.).
This article cannot be supplied as shown any more; as a replacement, Pump 6101.015 and Power Supply Unit 6105.240 will be supplied. The attachment of Turbelle® 6101,6100 or 6000 can continued to be used.
is no longer supplied; as a replacement for Turbelle® 6000 and 6100, please order article 6100.015. The attachment of the previous pump can continued to be used.
This part will be replaced by 6100.700 for Turbelle® stream 6000 and 6100. For Turbelle stream 6210.10 and 6200 the spare part 6200.700 is required.
6100.600
29,10 EUR
včetně MwSt (19,00 %)
Drive unit+ propeller
New drive unit with Hydropropeller for Turbelle stream 6000 and 6100. This new drive unit contain the hydroproller 6100.120 already. It replaces 6100.60 + 6100.120 or 6080.600 +6100.120.
This article cannot be supplied as shown any more; instead Pump 6105 is supplied with another holder without power supply unit. The attachment to the holder of the previous pumps 6000, 6100 or 6101 is still possible. The previous power supply unit can continued to be used.
Designed identically to the model 6105.000, but is equipped with an XLR-plug, seal and XLR housing connector, without power supply.
Version only for professional use without power supply in wet areas with its ownpower supply 12-24V DC.
Designed identically to the model 6155.000, but is equipped with an XLR-plug, seal and XLR housing connector, without power supply.
Version only for professional use without power supply in wet areas with its ownpower supply 12-24V DC.
This article cannot be supplied as shown any more; as a replacement, Pump 6201.015 and Power Supply Unit 6300.240 will be supplied. The attachment of Turbelle® 6200 or 6000 can continued to be used.
is no longer supplied; as a replacement for Turbelle® 6200, we recommend the use of replacement article 6200.015. The attachment of the previous pump can continued to be used.
New drive unit with Hydropropeller for Turbelle stream 6200 and Wavebox 6212. This new drive unit contain the hydroproller 6200.120 already. It replaces 6100.60 + 6200.120.
This article cannot be supplied as shown any more; instead Pump 6155 is supplied with another holder without power supply unit. The attachment to the holder of the previous pumps is still possible. The previous power supply unit can continued to be used.
This article cannot be supplied as shown any more; instead Pump 6255 is supplied with another holder without power supply unit. The attachment to the holder of the previous pumps is still possible. The previous power supply unit can continued to be used.
Power Supply Box (1) je skříńka s ochrannou normou IP33 (IEC 60529): Chráněnou proti nárazům předmětů větších než 2,5 mm, proti kapkám vody dopadajícím z úhlu 60°. Tato ochranná skříńka je specielně určena pro napájecí zdroj Turbelle® masterstream 6512 a 6515 a je vybavena postranním vypínačem, větrákem a DIN- dlahou
12 V solenoid valve for tap water or CO2, 0 to 10 bar (0 to 145 psi) with connector for 6 mm (.23") hose for CO2 or reverse osmosis units, including power supply.
Schovává elegantně všechny kabely potřebné k provozu akvária, specielně u rozvodových kabelů, multicontrolleru, atd. Na obou stranách jsou umístěny otvory pro kabely, vyrobeno z těžce hořící umělé hmoty. Rozměey: d237 x š131 x v117mm, v bílé barvě
Pump 8550.700 does not require any connection to a power supply unit as it is operated exclusively by the hydraulic pressure of the waste water produced by the reverse osmosis (RO) plant. The unit improves the ratio between RO water and waste water by up to 400 per cent. However, this is achieved only, if the inlet pressure into the RO plant is too low. Suitable for RO plants of 40 to 200 l/day (10.5 to 52.8 USgal./day); ideal for RO plants with an excessively low inlet pressure of below 3 bar or rather 45 psi, for example. The minimum pressure is 2 bar or 30psi. The pump increases the service life of the membrane and reduces the creeping increase in the conductivity of the outgoing water (TDS creep). It reduces the waste water of the RO plant by up to 80 per cent in case of RO plants with an excessively low inlet pressure.
Přípojení do sítě: 230V/50Hz (115V/60Hz), kabel 2m.
Maximální výkon: 600l/h při 900l/h průtoku vody
Spotřeba proudu: 11W (15W) při 600l/h průtoku vzduchu. Motor je vybaven ochranným termostatem
Výstup čerpadla: má závit 3/4' GAS
Kryt čerpadla s plastovým nástavcem a tlumičem zvuku.
Pohon čerpadla : Rotor s vysokovýkonným magnetem jsou v jednom celku.
Uložený v keramice
Vybaven tlumičem zvuku a nastavením vzduchu
Postfilter je přídavný filter na odpěňovači a skládá se z upevňovacího kroužku a váčku na vývodu filtru se 300µm.Upevňovací kroužek je přizpůsoben rouře o průměru 50 mm.
Připojení do sítě: 230V/50Hz (115V/60Hz), kabel 2m.
Maximální výkon vzduchu: 850l/h při 1.300l/h průtok vody.
Spotřeba proudu: 15W při 850l/h půtoku vzduchu.Motor vybaven ochranným termostatem.
Výstup čerpadla: má 3/4' GAS závit
Kryt čerpadla s nasávacín plastovým nástavcem a tlumičem zvuku
Pohon čerpadla: rotor s vysoce výkonným magnetem skládajícího se z jednoho dílu uloženého v keramice
Vybaveno: spojovacím článkem, tlumičem zvuku