This controller set is a measuring and regulating station used to heat or cool with a reading in °Celsius. The included switched socket outlet also serves as a power aupply unit for the controller. The switching output is 1,800 W at 230 V. With batteries fitted (not contained in the scope of supply) the instrument can be used as an easy-to-handle and precise temperature measuring instrument. The measuring instrument comes with two different types of wall mount. The electrode comes with a universal holding device and thus solves almost all mounting problems.
Controller Set with a reading in ° F; the switched socket outlet switches an ohmic load of 900W at115V/60Hz.
Measuring range: 0° to +55°C
(32° to 131°F).
Switching range: 3° to +40°C
(37° to 104°F).
Switching accuracy: ± 0.1° to 0.2°C
(3.38° to 6.76°F).
Ambient temperature: 0° to 45°C
(32° to 113°F).
Switching output: 1,800W/230V Ohmic load (900W/115V Ohmic load).
Dimensions: L156 x W83 x H30mm
(L6.1 x W3.2 x H1.1 in.).
Conductivity Meter (7032/2)
The unit is used for precise determination of the conductivity value in fresh, brackish and salt water. In salt water this conductivity meter displays the salt content through conductivity several times more accurate and simpler than a laboratory aerometer. This unit combines a robust hard carbon electrode and a temperature probe in a single-stick measuring electrode. The measurement is temperature compensated automatically. The measuring unit runs efficiently on a 9 Volt battery provided with an auto power off function. Continuous operation is possible without any problems when connected up to a separate power-supply unit. The measuring instrument comes with two types of wall holding device. The probe has a universal profiled holder and thus solves almost all installation problems.