Turbelle® e-jet 3005
Turbelle® e-jet 3005
Turbelle® e-jet 3005

Turbelle® e-jet 3005

Flow rate: 3,150 l/h (830 USgal./h)
Pumping head: 1,2 m (47.2")
Energy consumption: 22 W
Voltage / frequency:
230V/50Hz (115V/60Hz)
Cable length: 2 m (78.7")
Dimensions: ø98 x 100 mm (3.8 " x 3.9")
Inlet: ø25 mm (1")
Outlet: ø25 mm (1")
Magnet holder up to a glass thickness of 15 mm (2/3").

Instructions for use
All matching accessory articles
3005.000
168,50 EUR
Including VAT: (19,00 %)

Specifications

Turbelle® e-jet are high-performance centrifugal...

pumps. They have an impeller with a defined sense of rotation which is used to produce a water jet without any harmful shearing forces and fifty per cent less consumption of energy than conventional aquarium pumps. The synchronous motor with its electronic starting system offers very high reliability requiring less servicing and less current consumption. The extraordinary design, which includes the magnet holder, permits 3D adjustment and an uncomplicated attachment at any point on the aquarium pane. Without modifications, they replace all Turbelle® powerhead / electronic built since 1988.
Turbelle® e-jet are attached individually to the glass pane as circulation pumps or filters, and for this reason are supplied with magnet holder, strainer, flow deflector and filter cartridge.

Energy Saving

Low motor heat, high efficiency.


Magnetic rotors running...

on aqueous film bearings for low-maintenance and noiseless operation.

Titanium alloy shaft

Bearing-free pump suction side

Replaces all Turbelle® powerhead /...

electronic built since 1988

Performance table of e-jet pumps.

Performance table of e-jet pumps.

This performance table includes a tolerance of +/- 5 per cent.

All matching accessory articles

Pot Filter 820

Pot Filter 820

Quickchange filter with ø95 x 171 mm (3.7 " x 6.7").

0820.000
39,60 EUR
Including VAT: (19,00 %)
Connector
3200.520
0,00 EUR
Including VAT: (19,00 %)
Cartridge Filter 300

Cartridge Filter 300

is a cartridge filter with ø80 x 90 mm (3.1 x 2.5 in.).

0300.000
16,80 EUR
Including VAT: (19,00 %)
Cartridge Filter 800

Cartridge Filter 800

is a cartridge filter with ø80 x 145 mm (3.1 x 5.5 in.).

0800.000
25,70 EUR
Including VAT: (19,00 %)
Cartridge Filter 1600

Cartridge Filter 1600

is a cartridge filter with ø80 x 230 mm (3.1 x 9.0 in.).

1600.000
37,60 EUR
Including VAT: (19,00 %)
Cartridge Filter 3200

Cartridge Filter 3200

consisting of two cartridge filters 1600 and connector 3200.520.

3200.000
0,00 EUR
Including VAT: (19,00 %)
Cartridge 370

Cartridge 370

is a refill cartridge with ø80 x 65 mm (3.1 x 2.5 in.).

0370.000
21,70 EUR
Including VAT: (19,00 %)
Cartridge 870

Cartridge 870

Refill cartridge for aquarium carbon or fine wadding with ø80 x 115 mm (3.1 " x 4.5").

0870.000
27,70 EUR
Including VAT: (19,00 %)
Cartridge 1670

Cartridge 1670

is a refill cartridge with ø80 x 210 mm (3.1 x 8.2 in.).

1670.000
46,50 EUR
Including VAT: (19,00 %)
Filter cartridges, 75 mm (2.9")

Filter cartridges, 75 mm (2.9")

Ten spare filter cartridges with wound acrylic wadding fibers
Suitable for Turbelle® Pot Filter 320 and Cartridge Filter 300.

0300.020
21,70 EUR
Including VAT: (19,00 %)
Filter cartridges, 135 mm (5.3")

Filter cartridges, 135 mm (5.3")

Five spare filter cartridges with wound acrylic wadding fibers. Fitted with best aquarium wadding, can be washed two to five times.
Suitable for Turbelle® e-jet, Pot Filter 820, Cartridge Filter...

0800.010
15,80 EUR
Including VAT: (19,00 %)
Filter cartridges, 225 mm (8.8")

Filter cartridges, 225 mm (8.8")

Five spare filter cartridges with wound acrylic wadding fibers.
Suitable for Turbelle® cartridge filter 1600.

1600.010
21,70 EUR
Including VAT: (19,00 %)
Cartridge filter mat

Cartridge filter mat

Two cartridge fleeces for Foam cartridge 0800.140.

0800.220
2,90 EUR
Including VAT: (19,00 %)
Foam cartridge

Foam cartridge

Filter cartridge made of aquarium sponge to be used separately or with Cartridge filter mat 0800.220.

0800.140
6,80 EUR
Including VAT: (19,00 %)
Magnet holder

Magnet holder

Universal holder for attachment up to a glass thickness of 27 mm (1")
Dimensions: diam. 70 mm (2.6 in.) x W20 mm (.79 in.).

6205.500
128,80 EUR
Including VAT: (19,00 %)
Magnet extension

Magnet extension

The unit extends the holding power of Magnet Holder 6065.515 and 6105.515 from a glass thickness of 15 mm (1/2") to 20 mm (3/4").

6205.501
72,30 EUR
Including VAT: (19,00 %)
Silence clamp

Silence clamp

Clamp holder for Turbelle® stream and e-jet; attachment to magnet holders 6065.50 and 6205.50; suitable for the reduction of pumping noises.

6065.650
23,70 EUR
Including VAT: (19,00 %)
Magnet Holder Silence

Magnet Holder Silence

Holder for Turbelle® stream and e-jet; attachment to a glass thickness of up to 19 mm (.74 in.), suitable for the reduction of the pumping noise.

6065.600
99,10 EUR
Including VAT: (19,00 %)
Magnet Holder

Magnet Holder

Universal holder for attachment up to a glass thickness of 20mm (3/4"), dimensions: diam. 70mm (2.6 in.) x W20mm (.79 in.).

6065.520
87,20 EUR
Including VAT: (19,00 %)

The prices listed in the catalogue are given in EUR and contain a value-added tax of 19%. Additional information: