Osmolator® 3

€213.10*

Immediately available - delivery in 1-3 working days

Product number: 3154.000

Instruction manual:

x3151.8888 - DE, EN, FR, IT, ES

Product information "Osmolator® 3"

Straightforward and safe water level controller for fresh and sea water with optical control sensor and independent thermal safety sensor. A constant water level keeps the salt concentration constant in seawater aquariums. Incl. Turbelle® High Jet 5030 dosing pump with integrated dry running and blockage protection, magnet holder, branded 12V DC power supply unit, tube and tube holder. Suitable for placement in cabinet filter systems or on the edge of the aquarium. The sensor holds on glass panes up to 15 mm (0.59”) and the tube holder up to 22 mm (0.87”).

Specifications

The large, precise optical sensor detects the water level with an accuracy of 0.5 mm, resists air bubbles, deposits and scratches. The independent thermal safety sensor stops the Turbelle® High Jet 5030 pump in the event of overfilling, ensuring 100% overflow protection.

Plug & Play

All required components are ready for installation in the package (except reservoir). No software setup required. The fixed parameters are based on many years of experience.

Includes Turbelle® High Jet 5030

Long-lasting high-tech dosing pump Turbelle® High Jet 5030 with a maximum delivery height of 6.2 m (20.34') and pleasantly quiet operation thanks to a real 3-phase sine wave.

Includes hose and hose connector

The set includes a corrosion-resistant, screw-in push-in fitting (¼ inch BSP to ø6 mm). In addition, a PU hose made entirely in Germany - low-emission, hydrolysis-resistant, microbe-resistant, flexible, but does not tend to kink when laid.

Compact all-in-one construction

With magnet holder and tube holder for an attachment to any aquarium edge or in the aquarium filter up to 15 mm (2/3"). The tube holder holds on up to 22mm (0.87").

Power supply unit built according to medical technology standards.

With safety extra-low voltage 12V (SELV).

5 years warranty

"Built to last" according to our highest standards. Our exclusive service is automatically included. Without registration and without hidden hurdles. And of course always accommodating instead of petty-minded.

Made in Germany

It doesn't matter whether it's the special plastic parts from our own injection molding department, the winding of the motor, the soldering of the coils to the electronics, the encapsulation, the assembly of the individual parts and the testing of each pump, the pump is traditionally manufactured at our headquarters.