Turbelle® controller add-on

Turbelle® controller add-on

The Turbelle® controller is a pump controller for all Turbelle® pumps with an electric motor, which is used to set the variable pump performance – especially for models without an integrated Turbelle® controller. It can provide a wave motion simulation, oscillation flow, an automatic search for the resonance frequency when the oscillation flow is used, and it is also equipped with a food timer. If the Moonlight 7097.050 (not included in the scope of delivery) is attached to the Turbelle® controller, the night mode operation will be activated automatically. If this controller is connected to a second controller with the 7092.300 cable, a further pump can be connected and controlled, for example, to provide a wave motion simulation or an oscillating current. A third controller can be added using the Y adapter cable 7090.300.

Instructions for use
All matching accessory articles
7090.000
56,00 EUR
Only small amount on stock
Put into shopping cart.
Including VAT: (18,00 %) Plus costs of delivery







Specifications

An unbeatable team – Turbelle®...

pumps with electronic motor and TUNZE® controller. They can reproduce real reef currents in your tank. TUNZE® controller concentrate on the fundamentals. The following flow patterns can be produced in the aquarium very easily:

Wave simulation (pulse only) – Turbelle® Controller / Multicontroller / SmartController 7000

Wave simulation (pulse only) – Turbelle® Controller / Multicontroller / SmartController 7000

By setting the maximum and minimum outputs as well as the pulse duration, high and low water velocities can be produced generating a natural wash of waves under a one-metre water column.

Simulation of tidal currents (interval)  – Multicontroller / SmartController 7000

Simulation of tidal currents (interval) – Multicontroller / SmartController 7000

The pump channels are switched on or off alternately. The water flows through the reef
from both sides at an adjustable switching time from 1 minute up to 12 hours.

Sequential pump circuit (sequential)  – Multicontroller 7097

Sequential pump circuit (sequential) – Multicontroller 7097

The Turbelle® pumps are started sequentially, which permits the generation of a swelling current.

Random flow –  Multicontroller / SmartController 7000

Random flow – Multicontroller / SmartController 7000

Random flow is generated by wave simulation and sequential pump operation. For quite a number of special reef zones (surf) this combination may produce an interesting water movement.

Oscillating current with Wavebox or Turbelle® pumps – Turbelle® Controller / Multicontroller / SmartController 7000

Oscillating current with Wavebox or Turbelle® pumps – Turbelle® Controller / Multicontroller / SmartController 7000

In Turbelle® Controller / Multicontroller / SmartController 7000, the pump channels can be used as a Wavecontroller for the direct or alternating operation of the Wavebox or the Turbelle® pumps. This function comprises the automatic search of the resonance frequency, which can be combined with wash of waves or high and low tide simulation.

Foodtimer – Turbelle® Controller / Multicontroller / SmartController 7000

Foodtimer – Turbelle® Controller / Multicontroller / SmartController 7000

The pumps can be stopped completely by the push of a button to enable feeding. After about one to fifteen minutes (adjustable), a restart is carried out automatically.

Moon phase simulation (moonlight) – Turbelle® Controller / Multicontroller / SmartController 7000

Moon phase simulation (moonlight) – Turbelle® Controller / Multicontroller / SmartController 7000

The controllers and Moonlight Turbelle® with photo diode 7097.050 contain a moon-phase simulation function with LED light and adjustable 29-day moon phase.

Night setback (nightmode) – Turbelle® Controller / Multicontroller / SmartController 7000

Night setback (nightmode) – Turbelle® Controller / Multicontroller / SmartController 7000

The photo-electric cell 7097.050 is used to reduce the performance of the Turbelle® pumps at night. As in a reef, small animals and plankton can rise in the aquarium completing the natural cycle of diurnal and nocturnal animals occupying the habitat.

Storm for desedimentation (storm cycle) – Multicontroller 7097 / SmartController 7000

Storm for desedimentation (storm cycle) – Multicontroller 7097 / SmartController 7000

Like in nature, sediment should be removed from a reef aquarium in regular intervals. This function can be programmed in Multicontroller 7097 / SmartController 7000 to be carried out automatically; the pumps connected are controlled on the basis of an efficient and precise rhythm.

LED control (light control)  – Multicontroller 7097 / SmartController 7000

LED control (light control) – Multicontroller 7097 / SmartController 7000

Individual adjustment of the connected TUNZE® LED color channels, with sunrise and sunset times, seasonal adjustments, moonlight, lightning simulation during the storm and de-sedimentation function, and demo-light for each light channel.

All matching accessory articles

Moonlight Turbelle®

Moonlight Turbelle®

With photo diode. Simulates a 29-day moon phase and controls the night-time reduction at pumps with a Turbelle® controller add-on or together with SmartController 7000. Suitable for all Turbelle® electronic...

7097.050
39,20 EUR
Not on stock
Put into shopping cart.
Including VAT: (18,00 %) Plus costs of delivery
Y adapter cable

Y adapter cable

Connects two Turbelle® controllers for simultaneous controlling. An additional third pump or Moonlight 7097.050 can be connected. Connects SmartController 7000 with Turbelle® pumps and / or TUNZE® LEDs or the...

7090.300
23,50 EUR
On Stock
Put into shopping cart.
Including VAT: (18,00 %) Plus costs of delivery
Cable 1.2 m (47.24") Turbelle® controller

Cable 1.2 m (47.24") Turbelle® controller

Connects two Turbelle® controllers for a simultaneous controlling or connects one Turbelle® controller with a SmartController 7000.

7092.300
12,70 EUR
On Stock
Put into shopping cart.
Including VAT: (18,00 %) Plus costs of delivery
Controlled Power Socket

Controlled Power Socket

comprises power supply unit for connection to controller 7097 to switch e.g. aquarium lights 230 V (115 V) up to a maximum of 1,800 W (900 W) ohmic load.

7097.120
103,20 EUR
Not on stock
Put into shopping cart.
Including VAT: (18,00 %) Plus costs of delivery

The prices listed in the catalogue are given in EUR and contain a value-added tax of 18%. Additional information: