Temperature Controller

Temperature Controller

The Temperature Controller is a compilation consisting of the SmartController 7000 and its appropriate switching socket, the Controlled Power Socket 7070.120 in a separate package.

All matching accessory articles
7028.000
0,00 EUR

Specifications

SmartController 7000

SmartController 7000

Within a single device, the TUNZE® SmartController 7000 combines all important functions needed to create natural conditions within the aquarium. Till now, this required a variety of controller devices, where the alignment among the individual units often couldn't be implemented in a functional manner. The advantages of the new user-friendly all-in-one solution from TUNZE® are an easy handling, the clear overview and the optional compact installation into nearly any kind of aquarium furniture or the wall mounting.
The SmartController 7000 can control all Turbelle® electronic pumps and TUNZE® LEDs, switching sockets and valves. In addition, it measures and regulates the temperature, the pH value and the redox potential. The settings can be easily performed through a web interface with any Wi-Fi-enabled device which uses a web browser. But even without a Wi-Fi enabled device, it is possible to quickly and easily perform the basic settings via the touch panel.
Together with Turbelle® pumps, it is possible to reproduce complex ocean flow conditions in the aquarium. In conjunction with the TUNZE® LEDs, the course of a day just like in real nature can be simulated with the pumps. For this, the LEDs can be adapted to the brightness of the respective seasons. The fail-safe real time clock even stores the time during power outages, and without a leak-
prone battery. The SmartController 7000 is able to maintain a constant temperature, and also regulate the heating or cooling.
The galvanically decoupled pH / redox measurement guarantees an accurate measuring result at any time, regardless of all other connected electronic devices. The SmartController 7000 directly controls a solenoid valve, and thus the CO2 level to obtain a constant pH value in the aquarium or in the calcium reactor; with redox control and ozone, it controls a controlled power socket.
In case of a power failure, the SmartController 7000 no longer controls any output. If flow pumps are connected to a safety connector 6105.500, the SmartController 7000 must also be connected to
a safety connector.

Transparent polycarbonate sleeve to protect...

from moisture.

Wall mount.

Live display of pump performance.

Live display of temperature, pH...

or redox potential.

Splash-protected touchpad with touch protection...

/ parental control.

WIFI inside (for all OS).

Operating display for pumps.

Four 3-in-1 connectors for pumps...

/ LEDs / controlled power sockets / valves.

Temperature sensor.

Connector for pH or redox...

probe

Mains connection.

An unbeatable team – Turbelle®...

pumps with electronic motor and TUNZE® controller. They can reproduce real reef currents in your tank. TUNZE® controller concentrate on the fundamentals. The following flow patterns can be produced in the aquarium very easily:

Wave simulation (pulse only) – Turbelle® Controller / Multicontroller / SmartController 7000

Wave simulation (pulse only) – Turbelle® Controller / Multicontroller / SmartController 7000

By setting the maximum and minimum outputs as well as the pulse duration, high and low water velocities can be produced generating a natural wash of waves under a one-metre water column.

Simulation of tidal currents (interval)  – Multicontroller / SmartController 7000

Simulation of tidal currents (interval) – Multicontroller / SmartController 7000

The pump channels are switched on or off alternately. The water flows through the reef
from both sides at an adjustable switching time from 1 minute up to 12 hours.

Sequential pump circuit (sequential)  – Multicontroller 7097

Sequential pump circuit (sequential) – Multicontroller 7097

The Turbelle® pumps are started sequentially, which permits the generation of a swelling current.

Random flow –  Multicontroller / SmartController 7000

Random flow – Multicontroller / SmartController 7000

Random flow is generated by wave simulation and sequential pump operation. For quite a number of special reef zones (surf) this combination may produce an interesting water movement.

All matching accessory articles

Controlled Power Socket

Controlled Power Socket

to switch heaters, cooling units or ozone generators at SmartController 7000, max. 1,800W, 230 V (900W/115V) ohmic load, including connection cable for another pump/ LED on SmartController 7000.

7070.120
75,30 EUR
Safety Connector

Safety Connector

Enables normal operation using the TUNZE® power supply and will switch to a battery or DC supply automatically in the case of a power failure.

6105.500
74,30 EUR
Cleaning solution, 50 ml  (1.69 fl.oz)

Cleaning solution, 50 ml (1.69 fl.oz)

for pH, mV and conductivity electrodes.

Application:
Place the pH electrode in the cleaning solution for 10-30 minutes. If the electrode is left in the solution for a...

7040.200
10,80 EUR
CO2 Valve Set

CO2 Valve Set

including 8 V CO2 valve Ni-coated, non-return valve, 3 m (76.2") hose, connection cable for another pump / LED on SmartController 7000.

7070.200
79,20 EUR
Y adapter cable

Y adapter cable

Connects two Turbelle® controllers for simultaneous controlling. An additional third pump or Moonlight 7097.050 can be connected. Connects SmartController 7000 with Turbelle® pumps and / or TUNZE® LEDs or the...

7090.300
23,70 EUR
Moonlight Turbelle®

Moonlight Turbelle®

With photo diode. Simulates a 29-day moon phase and controls the night-time reduction at pumps with a Turbelle® controller add-on or together with SmartController 7000. Suitable for all Turbelle® electronic...

7097.050
39,60 EUR

The prices listed in the catalogue are given in EUR and contain a value-added tax of 19%. Additional information: