Osmolator® 3
Osmolator® 3
Osmolator® 3
Osmolator® 3
Osmolator® 3
Osmolator® 3
Osmolator® 3
Osmolator® 3
Osmolator® 3
Osmolator® 3
Osmolator® 3
Osmolator® 3

Osmolator® 3

Straightforward and safe water level controller for fresh and sea water with optical control sensor and independent thermal safety sensor. A constant water level keeps the salt concentration constant in seawater aquariums. Incl. Turbelle® High Jet 5030 dosing pump with integrated dry running and blockage protection, magnet holder, branded 12V DC power supply unit, tube and tube holder. Suitable for placement in cabinet filter systems or on the edge of the aquarium. The sensor holds on glass panes up to 15 mm (0.59”) and the tube holder up to 22 mm (0.87”).

Instructions for use
All matching accessory articles
3154.000
213,10 EUR
Including VAT: (19,00 %)

Specifications

The large, precise optical sensor...

detects the water level with an accuracy of 0.5 mm, resists air bubbles, deposits and scratches. The independent thermal safety sensor stops the Turbelle® High Jet 5030 pump in the event of overfilling, ensuring 100% overflow protection.

Plug & Play

Plug & Play

All required components are ready for installation in the package (except reservoir). No software setup required. The fixed parameters are based on many years of experience.

Includes Turbelle® High Jet 5030

Includes Turbelle® High Jet 5030

Long-lasting high-tech dosing pump Turbelle® High Jet 5030 with a maximum delivery height of 6.2 m (20.34') and pleasantly quiet operation thanks to a real 3-phase sine wave.

High-tech cable especially for demanding aquaristics

High-tech cable especially for demanding aquaristics

With remarkably high abrasion resistance, seawater resistance and extreme resistance to mechanical impact. As a result, it does not harden in water like PVC cables. With an extra high-contrast intermediate cable sheathing to detect damage at an early stage.
Produced in Bavaria by MEDI Kabel.

Includes hose and hose connector

Includes hose and hose connector

The set includes a corrosion-resistant, screw-in push-in fitting (¼ inch BSP to ø6 mm). In addition, a PU hose made entirely in Germany - low-emission, hydrolysis-resistant, microbe-resistant, flexible, but does not tend to kink when laid.

Compact all-in-one construction

Compact all-in-one construction

With magnet holder and tube holder for an attachment to any aquarium edge or in the aquarium filter up to 15 mm (2/3").

All matching accessory articles

Magnet extension

Magnet extension

The unit extends the holding power of Magnet Holder 6015.500 and 6025.512 for use on glass thicknesses of up to 15 mm (1/2").

6025.501
29,70 EUR
Including VAT: (19,00 %)
Hose connection short ø4x6mm

Hose connection short ø4x6mm

Short, suitable for all TUNZE® Osmolators®.

5030.201
7,80 EUR
Including VAT: (19,00 %)
Extension cable 3 m (9.84') - 3 pin

Extension cable 3 m (9.84') - 3 pin

Extends for example the cable from the Osmolator® sensor 3154.100 to the connected pump 5030 by 3m (9,84').

3154.022
34,60 EUR
Including VAT: (19,00 %)

The prices listed in the catalogue are given in EUR and contain a value-added tax of 19%. Additional information: