SmartController 7000.001
Product number:
7000.001
Instruction manual:
Product information "SmartController 7000.001"
The SmartController 7000.001 is intended for precise pH or redox measurements as well as uncomplicated over-the-air updates.
Includes a temperature probe.
Includes a wall mount.
Integrated real-time clock — No program shift in the event of a power failure. Fail-safe: Internet only required for configuration & notification. Not for operation. 5-year device and update guarantee.
Made in Germany.
Scope of delivery: SmartController 7000.001, temperature probe, 4 connection cables, universal connection cable, mounting set.
Dimensions without mount (L x W x H): 133 x 33 x 116 mm (5.2" x 1.2" x 4.5")
Includes a temperature probe.
Includes a wall mount.
Integrated real-time clock — No program shift in the event of a power failure. Fail-safe: Internet only required for configuration & notification. Not for operation. 5-year device and update guarantee.
Made in Germany.
Scope of delivery: SmartController 7000.001, temperature probe, 4 connection cables, universal connection cable, mounting set.
Dimensions without mount (L x W x H): 133 x 33 x 116 mm (5.2" x 1.2" x 4.5")
Specifications
TUNZE® HUB
Funding from hardware, no hidden operating costs.
Browser-based web interface: operating system independent, no drivers, no programs.
No hidden data collection.
Measured values are permanently secured online and can be viewed online.
Redundant servers at different locations in Europe.
Control: Fully configurable reaction system.
Complete communication encrypted.
Server to end device as device-individual AES256 encryption.
Fully configurable notification system.
Controls up to:
4x TUNZE® switched socket / valve
4x TUNZE® LED 8850 / Kessil® 0-10 V
4x TUNZE® Turbelle® electronic / 0-10 V pump
4x TUNZE® Aquawind
Accessories
Safety Connector
Enables normal operation using the TUNZE® power supply and will switch to a battery or DC supply automatically in the case of a power failure.
Nr.: 6105.500
€74.30*
*incl. 19% VAT, plus shipping costs
*incl. 19% VAT, plus shipping costs
Universal Splitting Cable
Suitable for SmartController 7000.001. The universal splitting cable 7000.010 makes it possible to connect each type of device to an output socket. One Turbelle® electronic and/or TUNZE® LED full spectrum 8850 or Moonlight Turbelle® can be connected to the two DIN sockets (a) using cable 7092.300. The stereo jack socket (b) carries the two 0-10V analog signals for lights. The polarity is suitable for the direct connection of the Kessil® A80 and A160 LEDs using the jack cable KSULC10. The unlabled DC hollow plug (c) is used for the direct connection of a switch socket or a solenoid valve with 12 V switching voltage. The DC hollow plug with cable labeling (d) is used for the direct connection of an Aquawind eco chic 7028.500.
Nr.: 7000.010
€34.60*
*incl. 19% VAT, plus shipping costs
*incl. 19% VAT, plus shipping costs
TUNZE® Aquawind
- Very quiet aquarium fan for accelerated evaporation and water cooling by 2-4°C.
- 12 V safety extra-low voltage. Power Consumption: About 1.7 W
- For standard aquariums up to 800 liters (211 USgal.).
- With individual tilt adjustment.
- For lengths up to 2 m (78.7”).
Nr.: 7028.500
€123.90*
*incl. 19% VAT, plus shipping costs
*incl. 19% VAT, plus shipping costs
Buffer solution pH 7 and 9 - 2x20ml each
for all pH measuring instruments.
Nr.: 7040.120
€16.80*
*incl. 19% VAT, plus shipping costs
*incl. 19% VAT, plus shipping costs
Buffer solution pH 4 and 7 - 2x20ml each
for all pH measuring instruments.
Nr.: 7040.130
€16.80*
*incl. 19% VAT, plus shipping costs
*incl. 19% VAT, plus shipping costs
Cleaning solution, 50 ml (1.69 fl.oz)
for pH, mV and conductivity electrodes.
Application: Place the pH electrode in the cleaning solution for 10-30 minutes. If the electrode is left in the solution for a longer period of time, the electrode will not be damaged, but the electrode will then have a longer response time and must be equilibrated in pH buffer solution. The longer response time is common and also applies to the storage solution, cleaning with purified water, strongly acidic or basic pH buffers. Therefore there are no special requirements for use. Storage: Long-term storage of the enzymatic solution should take place at 4-10°C (the enzyme is inactive at these temperatures and is not “consumed”). When shipping, temperatures up to 30°C are no problem for up to 10 days.
Application: Place the pH electrode in the cleaning solution for 10-30 minutes. If the electrode is left in the solution for a longer period of time, the electrode will not be damaged, but the electrode will then have a longer response time and must be equilibrated in pH buffer solution. The longer response time is common and also applies to the storage solution, cleaning with purified water, strongly acidic or basic pH buffers. Therefore there are no special requirements for use. Storage: Long-term storage of the enzymatic solution should take place at 4-10°C (the enzyme is inactive at these temperatures and is not “consumed”). When shipping, temperatures up to 30°C are no problem for up to 10 days.
Nr.: 7040.200
€10.80*
*incl. 19% VAT, plus shipping costs
*incl. 19% VAT, plus shipping costs
pH electrode 7070.110
made of glass, BNC, cable length 2 m (78.7 in.), suitable for unit 7070.000 or for commercially available measuring instruments.
Nr.: 7070.110
€123.90*
*incl. 19% VAT, plus shipping costs
*incl. 19% VAT, plus shipping costs
CO2 Valve Set
Includes 12V Ni-coated CO2 valve, check valve, 3 m (76.2") hose. Compatible with 7000.001, not with 7000.000.
Nr.: 7070.200
€79.20*
*incl. 19% VAT, plus shipping costs
*incl. 19% VAT, plus shipping costs
Magnet Holder for pH/mV probes
The TUNZE® probe holder offers a flexible and secure mounting solution for standard pH and millivolt probes (12 mm diameter) in aquariums. The proven TUNZE® magnetic platform ensures reliable attachment, designed in this configuration for glass thicknesses up to 12 mm. A particular advantage: the probe can be positioned freely in the aquarium, independent of the water level, braces, lids, or other edge-mounted elements. This allows exceptional flexibility in installation.
The magnets are sealed and processed in Germany, with the rest of the product also manufactured in Germany. Additionally, the product provides especially gentle support for the probe through silicone buffers that absorb minor impacts, minimizing the risk of damage. Thanks to the well-thought-out plug-and-play design, the probe holder is easy and quick to install. With a 5-year warranty, the probe holder ensures long-lasting reliability and quality.
The magnets are sealed and processed in Germany, with the rest of the product also manufactured in Germany. Additionally, the product provides especially gentle support for the probe through silicone buffers that absorb minor impacts, minimizing the risk of damage. Thanks to the well-thought-out plug-and-play design, the probe holder is easy and quick to install. With a 5-year warranty, the probe holder ensures long-lasting reliability and quality.
Nr.: 7070.301
€39.60*
*incl. 19% VAT, plus shipping costs
*incl. 19% VAT, plus shipping costs
Cable 1.2 m (47.24") Turbelle® controller
Connects two Turbelle® controllers for a simultaneous controlling or connects one Turbelle® controller with a SmartController 7000.
Nr.: 7092.300
€12.80*
*incl. 19% VAT, plus shipping costs
*incl. 19% VAT, plus shipping costs
Moonlight Turbelle®
With photo diode. Simulates a 29-day moon phase and controls the night-time reduction at pumps with a Turbelle® controller add-on or together with SmartController 7000. Suitable for all Turbelle® electronic pumps with 5-pin connector and power supply unit.
Nr.: 7097.050
€39.60*
*incl. 19% VAT, plus shipping costs
*incl. 19% VAT, plus shipping costs