SmartController 7000
SmartController 7000

SmartController 7000

Scope of delivery:
SmartController, temperature probe,
4 connection cables, mounting set.
Suitable for devices with Wifi and browser.
Dimensions without mount (L x W x H): 133 x 33 x 116 mm (5.2" x 1.2" x 4.5").
FOR A SOFTWARE UPDATE, PLEASE DOWNLOAD BOTH ZIP FILES WHICH ARE ATTACHED BELOW!

Instructions for use
All matching accessory articles
7000.000
349.99 USD







Specifications

SmartController 7000

SmartController 7000

Within a single device, the TUNZE® SmartController 7000 combines all important functions needed to create natural conditions within the aquarium. Till now, this required a variety of controller devices, where the alignment among the individual units often couldn't be implemented in a functional manner. The advantages of the new user-friendly all-in-one solution from TUNZE® are an easy handling, the clear overview and the optional compact installation into nearly any kind of aquarium furniture or the wall mounting.
The SmartController 7000 can control all Turbelle® electronic pumps and TUNZE® LEDs, switching sockets and valves. In addition, it measures and regulates the temperature, the pH value and the redox potential. The settings can be easily performed through a web interface with any Wi-Fi-enabled device which uses a web browser. But even without a Wi-Fi enabled device, it is possible to quickly and easily perform the basic settings via the touch panel.
Together with Turbelle® pumps, it is possible to reproduce complex ocean flow conditions in the aquarium. In conjunction with the TUNZE® LEDs, the course of a day just like in real nature can be simulated with the pumps. For this, the LEDs can be adapted to the brightness of the respective seasons. The fail-safe real time clock even stores the time during power outages, and without a leak-
prone battery. The SmartController 7000 is able to maintain a constant temperature, and also regulate the heating or cooling.
The galvanically decoupled pH / redox measurement guarantees an accurate measuring result at any time, regardless of all other connected electronic devices. The SmartController 7000 directly controls a solenoid valve, and thus the CO2 level to obtain a constant pH value in the aquarium or in the calcium reactor; with redox control and ozone, it controls a controlled power socket.
In case of a power failure, the SmartController 7000 no longer controls any output. If flow pumps are connected to a safety connector 6105.500, the SmartController 7000 must also be connected to
a safety connector.

Transparent polycarbonate sleeve to protect...

from moisture.

Wall mount.

Live display of pump performance.

Live display of temperature, pH...

or redox potential.

Splash-protected touchpad with touch protection...

/ parental control.

WIFI inside (for all OS).

Operating display for pumps.

Four 3-in-1 connectors for pumps...

/ LEDs / controlled power sockets / valves.

Temperature sensor.

Connector for pH or redox...

probe

Mains connection.

An unbeatable team – Turbelle®...

pumps with electronic motor and TUNZE® controller. They can reproduce real reef currents in your tank. TUNZE® controller concentrate on the fundamentals. The following flow patterns can be produced in the aquarium very easily:

Wave simulation (pulse only) – Turbelle® Controller / Multicontroller / SmartController 7000

Wave simulation (pulse only) – Turbelle® Controller / Multicontroller / SmartController 7000

By setting the maximum and minimum outputs as well as the pulse duration, high and low water velocities can be produced generating a natural wash of waves under a one-metre water column.

Simulation of tidal currents (interval)  – Multicontroller / SmartController 7000

Simulation of tidal currents (interval) – Multicontroller / SmartController 7000

The pump channels are switched on or off alternately. The water flows through the reef
from both sides at an adjustable switching time from 1 minute up to 12 hours.

Sequential pump circuit (sequential)  – Multicontroller 7097

Sequential pump circuit (sequential) – Multicontroller 7097

The Turbelle® pumps are started sequentially, which permits the generation of a swelling current.

Random flow –  Multicontroller / SmartController 7000

Random flow – Multicontroller / SmartController 7000

Random flow is generated by wave simulation and sequential pump operation. For quite a number of special reef zones (surf) this combination may produce an interesting water movement.

Oscillating current with Wavebox or Turbelle® pumps – Turbelle® Controller / Multicontroller / SmartController 7000

Oscillating current with Wavebox or Turbelle® pumps – Turbelle® Controller / Multicontroller / SmartController 7000

In Turbelle® Controller / Multicontroller / SmartController 7000, the pump channels can be used as a Wavecontroller for the direct or alternating operation of the Wavebox or the Turbelle® pumps. This function comprises the automatic search of the resonance frequency, which can be combined with wash of waves or high and low tide simulation.

All matching accessory articles

Buffer solution for pH 7 and 9

Buffer solution for pH 7 and 9

for all pH measuring instruments.

7040.120
13.49 USD
Cleaning solution

Cleaning solution

for pH, mV and conductivity electrodes.

7040.200
8.29 USD
Redox Test Solution +475 mV, 50 ml (1.7 oz.)

Redox Test Solution +475 mV, 50 ml (1.7 oz.)

Redox potential test solution for the verification of redox electrodes with the following measurement values:
+475 mV at 25°C (77°F) for electrodes with Pt / Ag / AgCl in...

7075.150
23.79 USD
pH electrode 7070.100

pH electrode 7070.100

made of plastic, BNC, cable length 2 m (78.7 in.), suitable for unit 7070.000 or for commercially available measuring instruments.

7070.100
89.99 USD
pH electrode 7070.110

pH electrode 7070.110

made of glass, BNC, cable length 2 m (78.7 in.), suitable for unit 7070.000 or for commercially available measuring instruments.

7070.110
109.99 USD
mV Electrode

mV Electrode

made of glass, BNC, cable length 2 m (78.7 in.), suitable to replace Redox Controller 7075.000, 7000.000 or commercially available mV measuring instruments.

7055.100
149.99 USD
pH/mV electrode holder
7070.300
29.29 USD
Controlled Power Socket

Controlled Power Socket

to switch heaters, cooling units or ozone generators at SmartController 7000, max. 1,800W, 230 V (900W/115V) ohmic load, including connection cable for another pump/ LED on SmartController 7000.

7070.120
69.99 USD
CO2 Valve Set

CO2 Valve Set

including 8 V CO2 valve Ni-coated, non-return valve, 3 m (76.2") hose, connection cable for another pump / LED on SmartController 7000.

7070.200
69.99 USD
Moonlight Turbelle®

Moonlight Turbelle®

With photo diode. Simulates a 29-day moon phase and controls the night-time reduction at pumps with a Turbelle® controller add-on or together with SmartController 7000. Suitable for all Turbelle® electronic...

7097.050
34.49 USD
Y adapter cable

Y adapter cable

Connects two Turbelle® controllers for simultaneous controlling. An additional third pump or Moonlight 7097.050 can be connected. Connects SmartController 7000 with Turbelle® pumps and / or TUNZE® LEDs or the...

7090.300
19.29 USD
Safety Connector

Safety Connector

Enables normal operation using the TUNZE® power supply and will switch to a battery or DC supply automatically in the case of a power failure.

6105.500
54.99 USD

The prices listed in the catalogue are given in USD and contain a value-added tax of 0%. Additional information: