Central Overflow
Central Overflow
Central Overflow

Central Overflow

Central overflow with surface and bottom suction up to about 1,500 l/h (400 US gal./h). Is used for aquariums with a central internal drain pipe. Fitted with a socket for PVC pipes, ø40 mm (1.6").
For complete installation, we recommend the use of screw connection, pipe and hose 1077.100.

Instructions for use
All matching accessory articles
1077.000
0.00 USD

Specifications

TUNZE® outlets with surface suction...

are an ideal solution for gravity water supply below the aquariums. An equal ratio of surface water and water from the lower water column are removed. The outlets remove only as much water as is pumped into the aquarium. On account of the light-protected construction, they are almost maintenance-free. TUNZE® outlets are supplied ready for mounting, with detailed mounting instructions. Inlet and outlet pipes are not included.
Two outlet systems should be used in aquariums with more than 600 liters capacity (160 USgal.).
At the outlet side, commercially available outlet pipes can be connected to the pipe sockets. However, we recommend the use of the outlet hose system 1075/2 to keep the noise as low as possible.
For the inlet, we recommend our inlet hose set 1073.000. The connecting hose for the pump in the cabinet is included.

All matching accessory articles

Supply pipe set

Supply pipe set

consisting of four pipes, ø25 mm x 1 m (1" x 39.3") and three sleeves, ø25 mm (1"), seven 90° angles, connecting hose and clamps.

1073.000
0.00 USD
Tangit, 125 g (4.4 oz.) tube

Tangit, 125 g (4.4 oz.) tube

for PVC, acrylic, et cetera.

0104.710
0.00 USD
Outlet filter

Outlet filter

Mechanical precleaner filter for all cabinet filter tanks, placed directly next to the drain hose of TUNZE® outlet, with removable post-filter with 300 µm (11.8 mil) nylon mesh.

1075.500
0.00 USD
Post-filter bag

Post-filter bag

300 µm (11.8 mil) nylon mesh, suitable for post-filters.

9410.200
19.99 USD
Silicone hose ø 22 x 28 mm x 2 m (.86" x 1.1" x 78.7")

Silicone hose ø 22 x 28 mm x 2 m (.86" x 1.1" x 78.7")

Feed hose for an easy connection of the recirculation pump to the aquarium. To be used for all cabinet filter systems, 100% resistant to saltwater.

1073.200
49.79 USD
Strainer, 12 cm (4.7")

Strainer, 12 cm (4.7")

suitable for pipe 1001.760, bushing 3000.780 and T piece 1001.800, to be used up to 4,000 l/h (1,050 US gal./h).

1001.790
13.79 USD
T piece

T piece

with cap for tube 1001.760.

1001.800
8.29 USD
Bushing, ø21 / 25 mm (.8 / 1")

Bushing, ø21 / 25 mm (.8 / 1")

connects two pipes 1001.760.

1001.780
3.29 USD

The prices listed in the catalogue are given in USD and contain a value-added tax of 0%. Additional information: