Multicontroller 7095

Multicontroller 7095

The TUNZE® Multicontroller 7095 is a digital control device for all Turbelle® pumps fitted with an electronic motor. It simulates the various maritime flow conditions within the aquarium, contains an LED moonlight with a 29-day moonphase, and is also able to control up to eight Turbelle® pumps. The clearly arranged operating panel with a waterproof membrane keypad and control buttons ensures a precise and practical operation. The output of the controlled pumps is shown by an LED display indicating from 30 to 100 per cent. All pump connections are located on the lower side of the unit.
In case of a power failure, the various settings remain saved; after the power interruption, the Multicontroller continues to operate with the program.
Delivery incl. four connecting cables 7092.300 and a photo-electric cell. It enables the near-natural flow control with up to four Turbelle® pumps, and respectively up to eight Turbelle® pumps using the Y adapter cable 7090.300.
Dimensions (L x W x H): 100 x 40 x 195 mm (3.9" x 1.6" x 7.7")

Instructions for use
All matching accessory articles

7095.000
290.01 USD
Including VAT: (0.00 %)



Specifications

An unbeatable team – Turbelle®...

pumps with electronic motor and TUNZE® controller. They can reproduce real reef currents in your tank. TUNZE® controller concentrate on the fundamentals. The following flow patterns can be produced in the aquarium very easily:

Wave simulation (pulse only) – Turbelle® Controller / Multicontroller / SmartController 7000

Wave simulation (pulse only) – Turbelle® Controller / Multicontroller / SmartController 7000

By setting the maximum and minimum outputs as well as the pulse duration, high and low water velocities can be produced generating a natural wash of waves under a one-metre water column.

Simulation of tidal currents (interval)  – Multicontroller / SmartController 7000

Simulation of tidal currents (interval) – Multicontroller / SmartController 7000

The pump channels are switched on or off alternately. The water flows through the reef
from both sides at an adjustable switching time from 1 minute up to 12 hours.

Sequential pump circuit (sequential)  – Multicontroller 7097

Sequential pump circuit (sequential) – Multicontroller 7097

The Turbelle® pumps are started sequentially, which permits the generation of a swelling current.

Random flow –  Multicontroller / SmartController 7000

Random flow – Multicontroller / SmartController 7000

Random flow is generated by wave simulation and sequential pump operation. For quite a number of special reef zones (surf) this combination may produce an interesting water movement.

Oscillating current with Wavebox or Turbelle® pumps – Turbelle® Controller / Multicontroller / SmartController 7000

Oscillating current with Wavebox or Turbelle® pumps – Turbelle® Controller / Multicontroller / SmartController 7000

In Turbelle® Controller / Multicontroller / SmartController 7000, the pump channels can be used as a Wavecontroller for the direct or alternating operation of the Wavebox or the Turbelle® pumps. This function comprises the automatic search of the resonance frequency, which can be combined with wash of waves or high and low tide simulation.

Foodtimer – Turbelle® Controller / Multicontroller / SmartController 7000

Foodtimer – Turbelle® Controller / Multicontroller / SmartController 7000

The pumps can be stopped completely by the push of a button to enable feeding. After about one to fifteen minutes (adjustable), a restart is carried out automatically.

Moon phase simulation (moonlight) – Turbelle® Controller / Multicontroller / SmartController 7000

Moon phase simulation (moonlight) – Turbelle® Controller / Multicontroller / SmartController 7000

The controllers and Moonlight Turbelle® with photo diode 7097.050 contain a moon-phase simulation function with LED light and adjustable 29-day moon phase.

Night setback (nightmode) – Turbelle® Controller / Multicontroller / SmartController 7000

Night setback (nightmode) – Turbelle® Controller / Multicontroller / SmartController 7000

The photo-electric cell 7097.050 is used to reduce the performance of the Turbelle® pumps at night. As in a reef, small animals and plankton can rise in the aquarium completing the natural cycle of diurnal and nocturnal animals occupying the habitat.

Storm for desedimentation (storm cycle) – Multicontroller 7097 / SmartController 7000

Storm for desedimentation (storm cycle) – Multicontroller 7097 / SmartController 7000

Like in nature, sediment should be removed from a reef aquarium in regular intervals. This function can be programmed in Multicontroller 7097 / SmartController 7000 to be carried out automatically; the pumps connected are controlled on the basis of an efficient and precise rhythm.

LED control (light control)  – Multicontroller 7097 / SmartController 7000

LED control (light control) – Multicontroller 7097 / SmartController 7000

Individual adjustment of the connected TUNZE® LED color channels, with sunrise and sunset times, seasonal adjustments, moonlight, lightning simulation during the storm and de-sedimentation function, and demo-light for each light channel.

All matching accessory articles

Moonlight Turbelle®

Moonlight Turbelle®

With photo diode. Simulates a 29-day moon phase and controls the night-time reduction at pumps with a Turbelle® controller add-on or together with SmartController 7000. Suitable for all Turbelle® electronic...

7097.050
34.35 USD
Including VAT: (0.00 %)
Y adapter cable

Y adapter cable

Connects two Turbelle® controllers for simultaneous controlling. An additional third pump or Moonlight 7097.050 can be connected. Connects SmartController 7000 with Turbelle® pumps and / or TUNZE® LEDs or the...

7090.300
19.14 USD
Including VAT: (0.00 %)
Cable 1.2 m (47.24") Turbelle® controller

Cable 1.2 m (47.24") Turbelle® controller

Connects two Turbelle® controllers for a simultaneous controlling or connects one Turbelle® controller with
a Multicontroller.

7092.300
10.70 USD
Including VAT: (0.00 %)
TUNZE® Safeguard

TUNZE® Safeguard

Hidden installation of the many cables of an aquarium system, ideal in combination with multiple outlet strips, multicontrollers. Features cable openings on both sides, made from flame retardant synthetic material.

7096.600
77.56 USD
Including VAT: (0.00 %)
Controlled Power Socket

Controlled Power Socket

comprises power supply unit for connection to controller 7097 to switch e.g. aquarium lights 230 V (115 V) up to a maximum of 1,800 W (900 W) ohmic load.

7097.120
89.67 USD
Including VAT: (0.00 %)

The prices listed in the catalogue are given in USD and contain a value-added tax of 0%. Additional information: