Recirculation pump Silence electronic
- Flow rate: 1,100 to 3,000 l/h (290 to 790 US gal./h) with Turbelle® Controller
- Energy consumption: 10 - 43 W
- Voltage / frequency: 100 - 240 V / 50 - 60 Hz Cable length: 3 m (118.1 in.)
- Hmax: 3.9 m (153.5 in.), ¾" NPT hose connection
- Dimensions without outlet and suction cups: 118 x 94 x 75 mm (4.6 x 3.7 x 2.9 in.)
Regular price:
€242.90
Incl. VAT, plus shipping
Art. no.
1073.050
Instruction manual:
Description
Flow rate: 1,100 to 3,000 l/h (290 to 790 US gal./h) with Turbelle® Controller
Hmax: 3.9 m (153.5 in.)
¾" NPT hose connection
Energy consumption: 10 - 43 W
Voltage / frequency: 100 - 240 V / 50 - 60 Hz
Cable length: 3 m (118.1 in.)
Dimensions without outlet and suction cups:
118 x 94 x 75 mm (4.6 x 3.7 x 2.9 in.)
Hmax: 3.9 m (153.5 in.)
¾" NPT hose connection
Energy consumption: 10 - 43 W
Voltage / frequency: 100 - 240 V / 50 - 60 Hz
Cable length: 3 m (118.1 in.)
Dimensions without outlet and suction cups:
118 x 94 x 75 mm (4.6 x 3.7 x 2.9 in.)
Specifications
Silence electronic – electronically controllable by the Turbelle® Controller
The Silence electronic is a safety low voltage, speed-controlled recirculation pump. It can be used in any aquarium and features a microprocessor-controlled motor, as well as a Turbelle® controller.
The electronic motor speed is adjusted to the pump load automatically, always searching for the optimum output / energy consumption ratio. If the pump is blocked, it will be turned off immediately. Once the blockage has been removed, the pump will restart automatically after a delay of 20 seconds. It features a Fish Care function, which will cause a propeller rotation every 20 seconds if the pump is stopped.
Safety extra-low voltage, blocking and run-dry protection.
Performance tables - Silence pump electronic
These performance tables include a tolerance of +/- 10 per cent.
Additional power supply for recirculation pump Silence 1073.050 – Safety Connector
The Silence 1073.050 recirculation pump features an electronic motor. Thus, the pump can be powered by any 10 to 24 V DC power supply (battery, solar cells). For a safe connection to the pump, we recommend the Turbelle® Safety Connector 6105.500 which features a 4A fuse. The Safety Connector enables normal operation using the TUNZE® power supply and will switch to a battery or DC supply automatically in the case of a power failure.
TUNZE® accessories
This product was not manufactured by us. However, it meets our high standards for function, quality, and reliability – including the full 5-year warranty.
Skip product gallery
Spare parts
24 VDC power supply unit
- Power supply unit for the pumps 6105.000, 1073.050, 5005.000, 6150.000, 6114.00 and 9430.001 from year of constructon 2015. Can also be used as a replacement for power supply unit 6105.240.
Art. no.
6101.240
€68.30
Incl. VAT, plus shipping
Protective cap, 16 mm (0.63 in.)
- Motor block ->3000/2 115V/60Hz
Art. no.
7090.103
€1.90
Incl. VAT, plus shipping
Skip product gallery
Accessories
Silicone hose, diam. 22 x3 x 230 mm
- Suitable for 1073.020, 1073.040, 1073.050 and 1073.060.
Art. no.
1073.500
€8.80
Incl. VAT, plus shipping
Safety Connector
- Enables normal operation using the TUNZE® power supply and will switch to a battery or DC supply automatically in the case of a power failure.
Art. no.
6105.500
€74.30
Incl. VAT, plus shipping