Turbelle® nanostream® 6040

Turbelle® nanostream® 6040

TUNZE® HUB EDITION
For aquariums from 20 to 500 liters (5.3 to 132 USgal.).
Flow rate: approx. 200 to 4,500 l/h (53 to 1,190 USgal./h) with Turbelle® Controller 7020
Energy consumption: 1.5 - 13 W
Power supply unit: 100-240V / 50-60Hz
Cable length: 3 m (118”)
Dimensions without flow deflector and Magnet Holder: 60 x 43 x 68 mm (2.36 x 1.69 x 2.68 in.)
Outlet: ø40 mm (1.57”)
Silence Magnet Holder up to a glass thickness of 15 mm (2/3”).

Instructions for use
All matching accessory articles
6040.005
186,40 EUR
Including VAT: (21,00 %)

Specifications

TUNZE® HUB EDITION

TUNZE® HUB EDITION

The TUNZE® HUB EDITION pumps can be controlled electronically and have been provided with a fish-care function. These pumps are equipped with the Turbelle® Controller 7020 to adjust the pump performance and for access to the TUNZE® HUB. Using this cloud solution, many devices from TUNZE® and other manufacturers can be clearly controlled and regulated via WiFi and the Internet. An integrated real-time clock prevents time shifts due to power failure.

Turbelle® nanostream® 6040

Turbelle® nanostream® 6040

This very compact circulation pump for aquariums from 20 to 500 liters (5.3 to 132 USgal.) can be easily hidden behind a decoration, and thus ensures the harmonious overall appearance of a small aquarium, absolutely perfect for aquascaping. Thanks to the special flow deflector and Magnet holder, the wide waterjet is 3D adjustable at the pump outlet. Through the Silence holder it does not touch the aquarium glass pane directly and is therefore unable to transmit vibrations, which makes it one of the quietest pumps available on the market.
The Turbelle® nanostream® 6040 electronic WIDE FLOW is our smallest speed-controlled circulation pump with an extra-low 12 V safety voltage, which has a Fish Care Function that triggers a revolution of the propeller every 20 seconds when the pump is in standstill. Comes standard with controller, but it can also be controlled by a Multicontroller / SmartController 7000.

Circular flow

Circular flow

Propeller technology

Includes Magnet Holder

Safety extra-low voltage, blocking and...

run-dry protection.

High-tech cable especially for demanding aquaristics

High-tech cable especially for demanding aquaristics

With remarkably high abrasion resistance, seawater resistance and extreme resistance to mechanical impact. As a result, it does not harden in water like PVC cables. With an extra high-contrast intermediate cable sheathing to detect damage at an early stage.
Produced in Bavaria by MEDI Kabel.

5 years warranty

5 years warranty

"Built to last" according to our highest standards. Our exclusive service is automatically included. Without registration and without hidden hurdles. And of course always accommodating instead of petty-minded.

All matching accessory articles

Extension cable 5 m (16,4') - 4 pin

Extension cable 5 m (16,4') - 4 pin

Extends the cable from a Turbelle® Controller 7020 to the connected pump by 5m (16,4').

7020.180
35,20 EUR
Including VAT: (21,00 %)
Safety Connector

Safety Connector

Enables normal operation using the TUNZE® power supply and will switch to a battery or DC supply automatically in the case of a power failure.

6105.500
75,50 EUR
Including VAT: (21,00 %)
Jack cable ø3.5mm, 1.5m

Jack cable ø3.5mm, 1.5m

Connects two Turbelle® controllers for a simultaneous controlling or connects one Turbelle® controller with a SmartController 7000.

7020.300
13,00 EUR
Including VAT: (21,00 %)
Magnet holder

Magnet holder

Universal holder for attachment up to a glass thickness of 20 mm (¾")
Dimensions: ø50 mm (1.9") x W15 mm (.59")

6025.500
59,40 EUR
Including VAT: (21,00 %)

The prices listed in the catalogue are given in EUR and contain a value-added tax of 21%. Additional information: